P-660HN-T1 v2: Cara Merubah Setting Password dan Nama Wifi IndiHome atau Speedy Internet

P-660HN-T1 v2: Cara Merubah Setting Password dan Nama Wifi IndiHome atau Speedy Internet

Source: https://www.youtube.com/watch?v=szoS8dU21qw

P-660HN-T1 v2: Setting Internet Speedy indihome dengan Modem Zyxel P-660HN-T1

P-660HN-T1 v2: Setting Internet Speedy indihome dengan Modem ZyXEL P-660HN-T1

Source: http://ceritadaerahkami.blogspot.sg/2016/01/setting-internet-speedy-indihome-dengan.html


kali ini admin ingin share tentang cara setting modem baru yaitu modem ZyXEL P-660HN-T1 v2. Modem baru ini hadir dengan dual antena serta 4 Port LAN, tampil dengan warna hitam membuat ZyXEL P-660HN-T1 v2 terlihat lebih kokoh. Sama seperti modem speedy lainya modem ini juga berfungsi menghubungkan kita ke internet melalui jaringan ADSL milik telkom.

Wifi pada modem ini memiliki jangakuan yang cukup luas sekitar 10 meteran, sangat pas untuk indoor atau outdoor, modem ni diperuntukan untuk rumahan, dengan satu alat dapat menghubungkan banyak peranti seperti komputer, notebook, smartphone, bahkan tv kabel (useetv).

Lanjut ke topik yang akan kita bahas, sebelum ketahap setting modem pastikan terlebih dahulu hal-hal yang di butuhkan pada saat setting modem.

Alat dan Bahan :

• Modem ZyXEL P-660HN-T1 v2, beserta kelengkapanya tentunya.
• Nomor Speedy yang akan di setting.
• Password Nomor Speedy yang akan di setting.
• Kabel UTP / RJ45.

Cara Setting Modem Speedy

• Pastikan Modem Menyala dan terpasang dengan lengkap, baik modem ke adaptor, dan kabel telepon ke modem.
• Pasang Kabel UTP/ RJ45 dari modem ke PC atau Modem ke Laptop / Notebook.
• Ikuti caranya sesuai nomor yang sudah di buat

buka browser mozzila / chrome masukan alamat 192.168.1.254, lalu klik login untuk masuk setingan modem Modem ZyXEL


Isikan password : admin dan username : admin

• setelah login klik icon roda gigi seperti gambar di atas
• untuk setting internet klik ikon WAN seperti gambar di atas

Rubah settingan Virtual circuit =PVC1dengan VPI = 8 dan VCI 81.

• Untuk menemukan settingan pada nomor 7, silakan scrol pada mouse anda hingga ketemu settingan seperti gambar di atas, kemudian setting PPPoE dengan mengisi username = nomor speedy anda dan Password = Password speedy anda Jangan lupa klik apply jika sudah yakin.
• Jika sudah di setting jangan lupa untuk restart modem supaya settingannya jadi lebih fresh, caranya klik icon information untuk kembali ke halaman utama.
• Setelah ke halaman utama Klik tombol restart modem

USG20 How to automatically reboot the device at 3:00 am every day or every Sunday?

USG20 How to automatically reboot the device at 3:00 am every day or every Sunday?

Reference: http://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=013302&lang=EN

Step :

You can use schedule run by the following steps:

(1) Make sure the date and time is properly set on USG20.

(2) Upload a shell script to the device.

a. The contents of .zysh are:

configure terminal

reboot

b. save this file as "reboot_device.zysh"

c. upload this file to shell scrip page. (Maintenance > File Manager > Shell Scrip)

(3a) Use CLI command to run the schedule everyday:

Router(config)# schedule-run 1 reboot_device.zysh daily 03:00

(3b) Use CLI command to run the schedule every Sunday:
 Router(config)# schedule-run 1 reboot_device.zysh weekly 03:00 sun

ZyWALL 110: How to block all Internet-bound traffic while allow only WhatsApp and Viber

1) Setup Application Object called "app"

2) Add Application Rule 

3) In order to block all Internet traffic, please make sure you have selected all the categories.

4) To allow WhatsApp, please make sure you do not select WhatsApp in Instant messaging Category.

5)  To allow Viber, please make sure you do not select Viber in Voice over IP Category.

6) Apply rule to drop or reject selected categories using App Patrol. This will need IDP licence to be updated once. No continuous update required except new applications to be allowed.

7) Enable Content Filter to block all websites including HTTPS. Need Content Filter License.

8) Enable Policy Control.

UAG4100: How to create batch static accounts similar in VSG1200v2?

This is an application requirement in School for students to access. School needs to create multiple accounts in batch which can be done on ZyXEL VSG1200v2. See page 95 on ZyXEL VSG1200v2 user's guide.

Eg : user ID student01 to student20

How to do it on UAG4100?

As of now, UAG 4100 supports static account but does not support "create multiple accounts in batch at one time". User will need to create multiple accounts one by one.

Here is the workaround using CLI command to create static account:

Router(config)#username student01 password 1234 user-type pre-subscriber

Step 1: Create XLS so that can use Auto Fill function to create a series.

Step 2: From XLS, Save As .CSV file format.

Step 3: Open CSV file using Notepad. 

Find and Replace , with [Space]. Save the file as TXT.

Step 4: Copy all the commands in TXT and paste at one go to CLI Config. You should get the following results:

Router(config)#username student01 password 1234 user-type pre-subscriber

Router(config)#username student02 password 1234 user-type pre-subscriber

Router(config)#username student03 password 1234 user-type pre-subscriber

Router(config)#username student04 password 1234 user-type pre-subscriber

Router(config)#username student05 password 1234 user-type pre-subscriber

Router(config)#username student06 password 1234 user-type pre-subscriber

Router(config)#username student07 password 1234 user-type pre-subscriber

Router(config)#username student08 password 1234 user-type pre-subscriber

Router(config)#username student09 password 1234 user-type pre-subscriber

Router(config)#username student10 password 1234 user-type pre-subscriber

Router(config)#username student11 password 1234 user-type pre-subscriber

Router(config)#username student12 password 1234 user-type pre-subscriber

Router(config)#username student13 password 1234 user-type pre-subscriber

Router(config)#username student14 password 1234 user-type pre-subscriber

Router(config)#username student15 password 1234 user-type pre-subscriber

Router(config)#username student16 password 1234 user-type pre-subscriber

Router(config)#username student17 password 1234 user-type pre-subscriber

Router(config)#username student18 password 1234 user-type pre-subscriber

Router(config)#username student19 password 1234 user-type pre-subscriber

Router(config)#username student20 password 1234 user-type pre-subscriber

Step 5: Verify static accounts created on GUI.

XGS3600-28F: Config VLAN Trunk with HP Procurve and Cisco Router

I assumed that Cisco router (Gateway) is using port 1, XGS3600 port 1 is connected to Cisco router and XGS3600 port 2 to HP Procurve Switch, at HP Procurve port 1 will be connected to XGS3600, port 2 connected to PC1 and port 3 to PC2. Here are the simple configuration on Cisco Router, XGS3600 and HP Procurve respectively:

Cisco Router:

interface GigabitEthernet0/1.2

description Customer-1

encapsulation dot1Q 2

ip address 192.168.1.1 255.255.255.0

!

interface GigabitEthernet0/1.3

description Customer-2

encapsulation dot1Q 3

ip address 192.168.2.1 255.255.255.0

!

XGS3600:

Switch(vlan)# port-type 1 c-port

Switch(vlan)# egress-rule 1 trunk

Switch(vlan)# port-type 2 c-port

Switch(vlan)# egress-rule 2 trunk

Switch(vlan)# tag-group 2 Customer-1 1,2

Switch(vlan)# tag-group 3 Customer-2 1,2

HP Procurve:

vlan 2

   name "Customer-1"

   untagged 2

   tagged 1

   exit

vlan 3

   name "Customer-2"

   untagged 3

   tagged 1

   exit

PC1:

IP: 192.168.1.2/24

PC2:

IP: 192.168.2.2/24

Thank you to Gencar for his contribution.